Ordering Information
Ordering Information for pneumatic actuated system
Valve – Type, Make, Breaking Torque, Mounting Flange details
Service conditions –Line Fluid, Temperature, Air operating pressure available
Actuator – Double acting or Spring return
Solenoid Valve – Power supply, Type, Enclosure, weather Proof / Flame Proof(IIA / IIB / IIC)
Solenoid coil – Terminal box, Plug in
Limit switch – Nos, power supply, Electrical rating (Amp/Volt), Enclosure (weather proof/explosion proof)
Other Accessories needed
Special options a) 3 Position Rotary Actuator (Suitable for coarse – fine adjustment typically in batching operations or processes) b)180 degree Rotory Actutor (Suitable for 3 way valve /V port Ball / Segment Ball, Butterfly, Plug / Dampers)
Action on Air failure – Open, close, stray put
Positioner – Pneumactic, electropnumatic
Service conditions –Line Fluid, Temperature, Air operating pressure available
Actuator – Double acting or Spring return
Solenoid Valve – Power supply, Type, Enclosure, weather Proof / Flame Proof(IIA / IIB / IIC)
Solenoid coil – Terminal box, Plug in
Limit switch – Nos, power supply, Electrical rating (Amp/Volt), Enclosure (weather proof/explosion proof)
Other Accessories needed
Special options a) 3 Position Rotary Actuator (Suitable for coarse – fine adjustment typically in batching operations or processes) b)180 degree Rotory Actutor (Suitable for 3 way valve /V port Ball / Segment Ball, Butterfly, Plug / Dampers)
Action on Air failure – Open, close, stray put
Positioner – Pneumactic, electropnumatic
Ordering information for electrical actuated system
Valve – Type, Make, Break Open & Close Torque, No of rotations
Service conditions – Line Fluid, Temperature, Line pressure
Power supply – Available(single phase / 3 phase) 230V / AC /24 V DC / 110 V AC
Special enclosure – Needed (weatherproof / flameproof IIA / IIB / IIC)
Starter – Integral / control panel / both locations
Operational time needed
Control signal (Input) & retransmission signal (output) needed – 4 -20mA / 0 – 10V DC
Extra limit / torque swicthes needed ?
Potentiometer needed? Position transmitter / valve positioner needed?
Other Accessories if any On / off, modulate
Service conditions – Line Fluid, Temperature, Line pressure
Power supply – Available(single phase / 3 phase) 230V / AC /24 V DC / 110 V AC
Special enclosure – Needed (weatherproof / flameproof IIA / IIB / IIC)
Starter – Integral / control panel / both locations
Operational time needed
Control signal (Input) & retransmission signal (output) needed – 4 -20mA / 0 – 10V DC
Extra limit / torque swicthes needed ?
Potentiometer needed? Position transmitter / valve positioner needed?
Other Accessories if any On / off, modulate
Ordering information for control valve
Valve type – Globe 2 / 3 way / Butterfly / Diaphragm / V Notch Ball / Pressure Regulating Valves
Material – Body + Trim
Line size
Line fluid
Flow rate – Max / normal / minimum
Pressure – Inlet / outlet
Temperature – Max
Characteristics – Equal % / linear / on – of
Actuation form – Pneumatic / Electric
Action on air failure – Open / close / stay put
Accessories required a) Valve positioners b) Air filter pressure regulator c) Solenoid valves d) Air lock e) Volume booster etc
Material – Body + Trim
Line size
Line fluid
Flow rate – Max / normal / minimum
Pressure – Inlet / outlet
Temperature – Max
Characteristics – Equal % / linear / on – of
Actuation form – Pneumatic / Electric
Action on air failure – Open / close / stay put
Accessories required a) Valve positioners b) Air filter pressure regulator c) Solenoid valves d) Air lock e) Volume booster etc
